SunGoldPower
LF-PV Series 48V Split-Phase Pure Sine Wave Inverter/Charger with 120/240V Output, 12kW, 15kW or 18kW
LF-PV Series 48V Split-Phase Pure Sine Wave Inverter/Charger with 120/240V Output, 12kW, 15kW or 18kW
Couldn't load pickup availability
Share

Choose a 12 kW, 15 kW, or 18 kW LF-PV Series inverter/charger for a compatible 48 V battery system. Each model combines a pure sine wave inverter, an AC battery charger, and an automatic transfer switch in one unit. It requires 240 V AC input and provides 120/240 V split-phase AC output.
AC priority is the default, and you can select battery priority to suit your setup. The inverter/charger also supports remote control and automatic generator starting. For solar charging, use a separate compatible solar charge controller.
Product Specifications
Series
LF-PV.
Output Power Options
12,000 W, 15,000 W, or 18,000 W, depending on the selected model.
Battery System Voltage
48 V DC.
Required AC Input
240 V AC.
AC Output
120/240 V split-phase, pure sine wave.
Output Frequency
50 Hz or 60 Hz, selectable via the SW4 switch.
Power Source Priority
AC priority by default. Select battery priority via the SW5 switch.
Integrated Functions
AC battery charger and automatic transfer switch.
Installation and Compatibility
Solar Charging
The LF-PV Series requires a separate compatible solar charge controller for solar battery charging.
Battery and Load Compatibility
Confirm that your battery’s charging requirements match the selected inverter/charger. Check your equipment’s voltage, frequency, running power, and startup demand when choosing an output rating.
Generator Integration
Automatic Generator Starting (AGS) is supported. Confirm that your generator supports the required start controls.
Frequently Asked Questions
Can I use a 120 V AC source to charge the battery through the inverter/charger?
The inverter/charger requires 240 V AC input. The 120 V rating applies to its output.
Can I connect solar panels directly to the inverter/charger?
Solar battery charging requires a separate compatible solar charge controller. The integrated charger uses AC input.
Can I change which power source the inverter uses first?
Yes. It defaults to AC priority. Use the SW5 switch to select battery priority.
Which output rating should I choose?
Choose from 12 kW, 15 kW, or 18 kW based on the combined running power and startup demand of the equipment you plan to operate.


