SunGoldPower
3,000W 24V Pure Sine Wave Inverter Charger with 120V AC Output and 40A Charger | LFP Series
3,000W 24V Pure Sine Wave Inverter Charger with 120V AC Output and 40A Charger | LFP Series
Couldn't load pickup availability
Share

The LFP Series 3,000W inverter charger combines a low-frequency pure sine wave inverter, a four-stage battery charger, and an automatic AC transfer switch. It runs from a 24V DC battery bank, uses a nominal 120V AC input, and provides 120V AC output. It delivers 3,000W continuously and up to 9,000W of surge power for 20 seconds.
AC priority is the default, and battery priority is selectable. The unit has an LCD, a GFCI outlet, and a marine-coated design. It also supports automatic generator start with a compatible generator.
Power and Charging Specifications
AC output and transfer — 120V AC at 60Hz, greater than 88% nominal efficiency, and a listed transfer time of 10 ms.
AC battery charger — Up to 40A with seven battery-type settings. Charging current is adjustable from 20% to 100% of the maximum, and the charger can be turned off.
DC input and idle consumption — 24V DC nominal input, 20V DC minimum startup voltage, 39W idle consumption, and 16W idle consumption in Power Saver mode.
Package Contents and Dimensions
The package includes the inverter charger, remote control, BTS cable, and English manual. The unit measures 17.4 × 9.5 × 7.8 in and weighs 53 lb.
Frequently Asked Questions
Can I use this inverter charger with a lithium battery?
Yes. It supports compatible 24V lithium batteries. Match the charger settings to the battery manufacturer’s charging requirements.
What happens when the battery voltage drops?
With AC input available, the charger can recharge the battery. When running on battery power, the inverter gives a low-voltage warning before shutting down at the selected cutoff. The listed alarm range is 21–22V, and the listed shutdown range is 20–21V.


