SunGoldPower
4,000W 24V Pure Sine Wave Inverter Charger with 120V AC Output and Automatic Transfer | LFP Series
4,000W 24V Pure Sine Wave Inverter Charger with 120V AC Output and Automatic Transfer | LFP Series
Couldn't load pickup availability
Share

The LFP Series 4,000W inverter charger combines a low-frequency pure sine wave inverter, a four-stage battery charger, and an automatic AC transfer switch. It runs from a 24V DC battery bank and uses nominal 120V AC input and output. It delivers 4,000W continuously and up to 12,000W of surge power for 20 seconds.
The inverter defaults to AC priority and can be set to battery priority. It has a built-in LCD, includes a remote control, and can start a compatible generator when battery voltage drops and shut it off after charging is complete.
Power and Charging Specifications
AC output and transfer — 120V AC at 60Hz, greater than 88% nominal efficiency, and a listed transfer time of 10 ms.
Battery charger — Four-stage AC charging rated at 65A ±5A, with seven battery-type settings. Charging current is adjustable from 20% to 100% of maximum, and the charger can be turned off.
DC input and idle consumption — 24V DC nominal input, 20V DC minimum startup voltage, 48W idle consumption in normal mode, and 19W in Power Saver mode.
Package Contents and Dimensions
The package includes the inverter charger, remote control, battery temperature sensor (BTS) cable, and English manual. The unit measures 17.4 × 9.5 × 7.8 in and weighs 53 lb. The shipping carton measures 26 × 12.6 × 12 in and weighs 57 lb.
Frequently Asked Questions
What do I need to charge the battery bank from solar panels?
Solar charging requires a separate solar charge controller compatible with the panels and the 24V battery bank.


